• Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001

Polyester Label FFE0001

Excellent print quality and durability are features of the Polyester Label type FFE0001. In sectors including electronics, automotive, and healthcare, it is frequently used to label products.
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001
  • Polyester Label FFE0001

Description

Specification of Polyester Label FFE0001

weight thickness material
Face Material 65±10%g/m2 ISO 536 0.045±10%mm ISO 534

Gloss white Polyester

Liner 58±10%g/m2 ISO 536 0.055±10%mm ISO 534 White glassine treated with super calender
Adhesive

A general permanent water-based acrylic adhesive. EP is an adhesive with a high initial viscosity. It has excellent adhesion performance on non-polar surfaces; it has high cohesive strength and low permeability; it has excellent anti-UV performance and can be used for direct contact labeling of food, medicine and cosmetics and other products.

Peel adhesion Initial adhesion
10N/25mm FTM 9 st.st

20 minutes Peel adhesion value on

steel at 180° 8N/25mm FTM 1 st.st

20 minutes Peel adhesion value on 

steel at 90° 4-5N/25mm FTM 2 st.st 

Temperature Min. Appl. Temp. 10ºC Service Temp. -10ºC+90ºC (after 24hrs)


Applications of Polyester Label FFE0001

The product has excellent tear resistance, dimensional stability and chemical corrosion resistance and suitable for making various durable labels.

The above suggestion, application, and elaboration are not intended as the guarantee of Melloway. All sales of Melloway products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.



Printing Methods of Polyester Label FFE0001

The surface is treated with a special coating, which can meet various printing methods without special ink treatment. It is suitable for ribbon printing. It is recommended to die-cut with a high-hardness tool, and at the same time avoid label overflow due to excessive winding tension. Provides excellent stiffness, good printability and die-cutting properties, excellent chemical and UV resistance.

Shelf life

12 months, applicable only to the material delivered by Melloway which has not undergone further processing, under the following STORAGE CONDITIONS:

  • This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.

  • Storage area must be dry and clean.

  • Keep the material in the original packaging when not used in order to protect it from dust and contamination.

  • Do not expose to direct sunlight or heat sources.